| Output |
| Output power capacity | 280 Watts / 450VA |
| Max Con?gurable Power (Watts) | 280 Watts / 450VA |
| Nominal Output Voltage | 230V |
| Output Voltage Distortion | Less than 5% at full load |
| Output Frequency (sync to mains) | 47- 53Hz For 50Hz nominal Sync to mains, 57-63Hz For 60Hz nominal Sync to mains |
| Topology | Line interactive |
| Waveform type | Stepped approximation to a sinewave |
| Output Connections | (2) IEC Jumpers
(4) IEC 320 C13 |
| Transfer Time | 4 ms typical: 8 ms maximum |
| Input |
| Nominal Input Voltage | 230V |
| Input frequency | 50/60Hz +/- 3 Hz Auto-sensing |
| Input Connections | IEC 320 C14 |
| Input voltage range for main operations | 151 - 302 Adjustable, 195 - 265V |
| Batteries & Runtime |
| Battery type | Lead-acid battery |
| Typical recharge time | 5hour(s) |
| Expected Battery Life (years) | 3 - 5 |
| RBC Quantity | 1 |
| Battery Charge Power (Watts) | 22 Watts |
| Communications & Management |
| Interface Port(s) | DB-9 RS-232 |
| Control panel | LED status display with online : on battery: replace battery and overload indicators |
| Audible Alarm | Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm |
| Emergency Power O? (EPO) | Optional |
| Surge Protection and Filtering |
| Surge energy rating | 320 Joules |
| Data Line Protection | RJ11 2-Way Modem/Fax/DSL splitter with protection (four-wire dual lines), RJ45 10/100 Base-T Ethernet protection |
| Filtering | Full time multi-pole noise ?ltering : 0.7% IEEE surge let-through : zero clamping response time : meets UL 1449 |
| Physical |
| Maximum Height | 44MM, 4.4CM |
| Maximum Width | 432MM, 43.2CM |
| Maximum Depth | 383MM, 38.3CM |
|
