Picture of APC Smart-UPS SMC Series Line Interactive 1000VA (600W) Tower. 230V Input/Output

APC Smart-UPS SMC Series Line Interactive 1000VA (600W) Tower. 230V Input/Output

Manufacturer: APC

APC Smart-UPS SMC Series Line Interactive. 1000VA (600W) Tower. 230V Input/Output. 8x IEC C13 Outlets. With Battery Backup. LED Status Indicators. USB Connectivity. Audible Alarm.

Manufacturer part number: SMC1000IC

Availability: Out of stock - on backorder and will be dispatched once in stock (Please Contact for Availability).

Estimated Time To Deliver: 3-5 Business days

APC Smart-UPS SMC Series Line Interactive. 1000VA (600W) Tower. 230V Input/Output. 8x IEC C13 Outlets. With Battery Backup. LED Status Indicators. USB Connectivity. Audible Alarm.

Cold-start capable
Provides temporary battery power when the utility power is out.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency
Reduces utility costs, generates less heat.
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
SmartConnect
Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Output
Output power capacity	600 Watts / 1.0kVA
Max Con?gurable Power (Watts)	600 Watts / 1.0kVA
Nominal Output Voltage	230V
Output Voltage Distortion	Less than 5 %
Output Frequency (sync to mains)	50/60 Hz +/- 3 Hz Sync to mains
Other Output Voltages	220, 240
Topology	Line interactive
Waveform type	Sine wave
Output Connections	(8) IEC 60320 C13
Transfer Time	6 ms typical : 10 ms maximum
Input
Nominal Input Voltage	230V
Input frequency	50/60 Hz +/- 3 Hz Auto-sensing
Input Connections	IEC 320 C14
Input voltage range for main operations	170 - 300 Adjustable, 180 - 287V
Other Input Voltages	220, 240
Batteries & Runtime
Battery type	Lead-acid battery
Typical recharge time	3hour(s)
Batteries & Runtime
Expected Battery Life (years)	3 - 5
RBC Quantity	1
Battery Charge Power (Watts)	72 Watts
Communications & Management
Interface Port(s)	RJ-45 Serial, USB
Control panel	Multifunction LCD status and control console
Audible Alarm	Alarm when on battery: distinctive low battery alarm: con?gurable delays
Surge Protection and Filtering
Surge energy rating	455Joules
Filtering	Full time multi-pole noise ?ltering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
<span class="f